About Bijlify X’TREME – I
30kW DC Fast Charger
30kW DC Fast Charger has complete protection system which includes surge protection, residual current devices, short circuit, over/under voltage etc. The Fast charger comes equipped with network communication capabilities to connect with remote network systems and provide real-time information, such as the locations of charging stations, charging parameters and billing information. Ideal for indoor / outdoor fast charging operations
Product Feature
- Charging protection such as input over / under voltage, connection abnormality, emergency stop.
- Protection against lightning, leakage, short circuit, over current, over temperature.
- Wall or Pole mounted installation, easy to install.
- Touch screen operation interface.
- Supports IEC 61851 standard charging.
- Display – 9” TFT touch screen interface.
- Flexible smart connectivity: Ethernet, SIM based, QR Code, OCPP 1.6.

Applications for

Residential & Commercial
Spaces

EV Fleet
Operators

EV Dealers

Charging Operating
Stations (L,M,S)

EV Service Providers
Technical Specification
Power Input | |
---|---|
Power Connection | 3P + N + PE |
Input Voltage | 415 VAC±10% |
Frequency | 50Hz±10% |
Efficiency | ≥94% |
Power Factor | ≥0.99 |
Total Harmonic Factor | THD <5% |
Power Output | |
Output Voltage | 150V-1000V |
Rated Power | 30kW |
Rated Output Current | 80Amp |
No. of Output | 1 |
Plug | CCS-2 |
Protection | |
Push Button | Emergency Stop Button |
Electrical Protection | Over Current, Over / Under Voltage, Surge Protection, Short Circuit Protection, Ground Fault, Over Temperature |
User Interface | |
Display | 9” TFT Color Touch Screen |
Status Indicator | Power ON, Charging ON and Fault |
User Authorization | QR Code |
Communication | |
---|---|
Network Connectivity | GSM / GPRo 3G/4G Connectivity, Wi-Fi |
Communication Protocol | OCPP v1.6J / MQTT / HTTP |
Environment | |
Operating Temperature | -20ºC to 60ºC |
Storage Temperature | -40ºC to 70ºC |
Humidity | 5% to 95% without condensation |
Altitude | ≤2000m |
Place of Installation | Indoor and Outdoor |
Mechanical Design | |
Shell Material | Hot-dip galvanized steel sheet |
Ingress Protection | IP-55 |
Cooling | Forced Cooling |
Length of charging gun | 5m |
Installation | Wall / Pole Mounted |
Dimensions (WXDXH) | 600mmX300mmX650mm |
Length of charging gun | 5m |
Regulation | |
Charging Mode Standard | IEC 61851-1 Charging Mode-4 |
*Charge Point operators
*Pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.